지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
등록된 정보가 없습니다.
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
플라즈마 용사의 특성 및 응용 ( The Characteristics and Applications of the Plasma Spray Coating )
대한용접·접합학회지
1997 .10
플라즈마 용사층에 발생하는 응력 해석 ( Analysis of Thermal Stresses Developed in Plasma Sprayed Layer )
대한용접·접합학회지
1990 .12
분말송급장치의 개조에 의한 미세 ( 5 μm ) Al2O3 분말의 송급특성개선 및 플라즈마 용사조건에 따른 코팅층의 특성분석 ( Improvement of Powder Feeding Characteristics of Fine ( 5 μm ) Al2O3 Powder by Modification of the Powder Feeding Systems and Characterization of the Coating Layer depending on Plasma Spraying Conditions )
대한용접·접합학회지
1997 .02
플라즈마 용사 코팅기술의 엔진부품에의 응용현황과 전망
한국표면공학회지
1993 .02
분말 열처리가 지르코니아 용사코팅층의 마모특성에 미치는 영향 ( Effect of Heat Treatment of powder on the Tribological Behavior of the Plasma Sprayed Zirconia Coating )
한국트라이볼로지학회 학술대회
2000 .11
플라즈마 용사코팅강재의 피로균열성장에 미치는 강화열처리의 영향
동력시스템공학회지
2003 .11
나노/마이크로 압입 시험에 의한 플라즈마 세라믹 용사코팅의 특성 평가
한국트라이볼로지학회 학술대회
2003 .06
용사 공정에 의한 비정질 코팅
대한용접·접합학회지
2003 .04
특집 : 재료의 플라즈마 표면처리 기술 ; 플라즈마 용사코팅 특성 평가 ( Assessment of the Plasma Spray Coatings )
대한용접·접합학회지
1999 .02
플라즈마 용사층에 발생하는 잔류응력 해석 ( An analysis of the residual stress in plasma sprayed layers )
대한용접학회 특별강연 및 학술발표대회 개요집
1989 .01
알루미나 세라믹의 플라즈마 용사코팅을 위한 용사조건의 최적화 ( Optimization of the spray parameters for plasma spray coating of alumina ceramic )
대한용접학회 특별강연 및 학술발표대회 개요집
1999 .01
플라즈마 용사된 원적외선방사 세라믹 용사층의 특성에 관한 연구 ( A study on the properties of plasma sprayed far-infrared radiation ceramic coating )
대한용접학회 특별강연 및 학술발표대회 개요집
1998 .01
플라즈마/레이저 복합용사에 의한 ZrO₂-8%Y₂O₃ 코팅층의 미세구조 및 기계적 특성
동력시스템공학회지
2000 .11
화학치밀화법에 의한 플라즈마 용사코팅층의 특성개선
한국재료학회 학술발표대회
1993 .01
The Effect of the Phase Transformations on the Durability of the Plasma Sprayed Thermal Barrier Coatings
한국표면공학회지
1996 .06
고분자 열용사 방식코팅의 계면접착특성
한국표면공학회 학술발표회 초록집
1997 .05
SiO₂-Al₂O₃계의 조성변화 및 조성변화 및 용사변수가 플라즈마 용사층에 미치는 영향 ( The influence of composition change and plasma spraying parameters on the coating of plasma sprayed SiO₂-Al₂O₃systems )
대한용접학회 특별강연 및 학술발표대회 개요집
1994 .01
플라즈마 용사용 산화크롬 / 몰리브덴 복합분말 제조와 용사코팅의 마찰 · 마멸 특성 ( Fabrication of Cr2O3 / Mo Composite Powders and Tribological Properties of Plasma-sprayed Coatings )
Tribology and Lubricants
1999 .06
0