메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2002년 춘계학술대회논문집
발행연도
2002.5
수록면
436 - 441 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. The standard CT specimen was used to obtain fracture resistance curves. But the fracture resistance curve by the standard CT specimen was very conservative to evaluate the integrity of the structure. And fracture resistance curve was affected by the specimen geometry and crack plane orientation. The objective of this paper is to be certain the conservativeness of the fracture resistance curve by the standard CT specimen and to provide the additional safety margin. For these, the fracture tests using the real pipe specimen and standard CT specimen test were performed. 4-point bending jig was manufactured for the pipe test and the direct current potential drop method was used to measure the crack extension and the length for the pipe test. From the result of the pipe and the standard CT specimen test, it was observed that the fracture resistance curve of the standard CT specimen test was conservative compare to that of the pipe specimen test.

목차

Abstract

1. 서론

2. 시험 장비 및 시험편

3. 균열 길이 측정

4. 파괴 저항 시험

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014199242