메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
전력전자학회 전력전자학회 학술대회 논문집 전력전자학회 1999년 추계학술대회논문집
발행연도
1999.11
수록면
89 - 93 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In general, DC power supply of arc-welding machine has been used to the diode rectifier. It's defect is the high current harmonics which bring about distortion of the utility currents. In this paper, using the three-phase PWM converter, the performance of arc-welding machine is improved by increasing the input power factor. When the diode rectifier in the arc-welding
machine is replaced with three-phase PWM
converter, PWM converter should control DC voltage of the output side. If PI controller is used for the output DC voltage regulator, the output DC voltage has high ripple voltage due to the instantaneous load variation in the
arc-welding machine. In this paper, the feedforward compensator has been introduced to reduce the DC voltage ripple. It lessens the influence of load current that is the disturbance of the output DC voltage regulator. Theoretical prediction of this analysis has been testified shows results by comparing with experimental data.

목차

Abstract

1.서론

2.아크용접기용 3상 PWM 컨버터

3.전향보상기의 설계 및 시스템해석

4.시뮬레이션 및 실험

5.결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-014250391