메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 대한기계학회 논문집 B권 대한기계학회논문집 B권 제28권 제8호
발행연도
2004.8
수록면
910 - 920 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The heat/mass transfer characteristics in a rotating two-pass duct With and without rib turbulators are investigated in the present study. The square duct has a hydraulic diameter (Dh) of 267 mm, and 1.5 mm×1.5 rom square 90˚-rib turbulators are attached on the leading and trading walls The pitch-to-rib height ratio (pie) is 10. The Reynolds number based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number is vaned from 00 to 020 In the smooth duct, the curvature of the 180˚-turn produces Dean vortices that enhance heat/mass transfer in the post-turn region. When rib turbulators are Installed, heat/mass transfer is augmented 2 5 times higher than that of the smooth duct Since the main flow is turbulated by reattaching and separating in the Vicinity of the duct surfaces The duct rotation results m heat/mass transfer discrepancy so that Sherwood number ratios are higher on the trailing surface in the first-pass and on the leading surface in the second-pass In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent heat/mass transfer characteristics also change As the rotation number increases, the heat/mass transfer discrepancy enlarges.

목차

Abstract

1. 서론

2. 실험장치 및 방법

3. 결과 및 고찰

4. 결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014426171