메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 대한기계학회 논문집 B권 대한기계학회논문집 B권 제28권 제8호
발행연도
2004.8
수록면
976 - 983 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
In high-density hard disk doves, the slider should be made to fly close to the magnetic recording disk to generate better signal resolution and at an increasingly high velocity to achieve better data rate. The slider disk interaction in CSS (contact-start-stop) mode is an Important source of particle generation. Contamination particles In the hard disk drive can cause serious problems including slider crash and thermal asperities We Investigated the number and the Sizes of particles generated in the hard disk drive, operating at increasing disk rotational speeds, in the CSS mode CNC (condensation nucleus counter) and PSS (particle Size selector) were used for this investigation In addition, we examined the particle components by using SEM (scanning electron microscopes), AES (auger electron spectroscopy), and TOF-SIMS (time of flight-secondary Ions mass spectrometry) The increasing disk rotational speed difectly affected the particle generation by slider disk interaction The number of particles that were generated increased With the disk rotational speed. The particle generation rate Increased rapidly at motor speeds above 8000 rpm Tins Increase may be due to the Increased slider disk Interaction. Particle Sizes ranged from 14 to 200 nm. The particles generated by slider disk Interaction came from the lubricant on the disk, coating layer of the disk, and also slider surface.

목차

Abstract

1. 서론

2. 실험

3. 결과 및 고찰

4. 결론

후기

참고문헌

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014426257