메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국기계가공학회 한국기계가공학회 춘추계학술대회 논문집 한국기계가공학회 2004년도 춘계학술대회 논문집
발행연도
2004.6
수록면
211 - 216 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (11)

초록· 키워드

오류제보하기
The lightness of components of required in automobile and machinery industry is requiring high strength of components In particular, fatigue failure phenomena, which happen in metal, bring on danger in human life and property Therefore, antifatigue failure technology take an important the part of current industries Currently, the shot peening is used for removing the defect from the surface of steel and improving the fatigue strength on surface
Therefore, this paper the effect of compressive residual stress by shot peening on fatigue crack growth characteristics m stress ratio(R=0 1, 03, 06)was investigated with considering fracture mechanics By using the methods mentioned above, I arrived at the following conclusions
(1) The fatigue crack growth rate of shot peening material was lower than the unpeening material And in stage I, △K_th, the threshold stress intensity factor, of the shot peening processed material is high m critical parts unlike the unpeening material. Also in, fatigue crack growth exponent and number of cycle of shot peening material was higher than that of the unpeening material That is concluded from effect of da/dN
(2) Fatigue life shows more improvement in the shot peening material than unpeening material And compressive residual stress of surface on the shot peening processed operate resistance of fatigue crack propagation

목차

Abstract

1. 서론

2. 시험편 및 실험방법

3. 실험결과 및 고찰

4. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-581-014431873