지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.19 No.1
- 발행연도
- 2005.1
- 수록면
- 97 - 105 (9page)
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
This paper proposes an Internet-based checking technique for machine-tools with variant Computerized Numerical Controller (CNC). According to its architecture, CNC is classified into one of two types: Closed Architecture Controller (CAC), which is the conventional CNC, or Open Architecture Controller (OAC), which is a recently introduced PC-based controller. Since CAC has a closed architecture, it is dependent on CNC vender specification. Because of this, it has been very difficult for users to implement application programs in the CNC domain. Recently, the conventional CNC of machine-tools has been replaced by a PC-based open architecture CNC. However, now many conventional CAC machines are being operated together with OAC machines in inadequately equipped shop floors. For Internet-based checking for variant CNC machines with CAC and OAC, a suitable systematic environment is necessary. Through this research, for the global management of variant CNC machines both a CAC and an OAC in the manufacturing system, a suitable environment for Internet-based checking of variant CNC machines was designed, and the checking methods for CAC and OAC machines were compared. The results of this research may serve as a base model for global monitoring and remote control in an integrated manufacturing system with variant CNC machines. Checking points defined in this research are classified into two categories: structured point and operational point. The former includes the vibration of bearing, temperature of spindle unit, and other points of periodical management, while the latter includes oil checking, clamp locking/ unlocking, and machining on/off status.
목차
Abstract
1. Introduction
2. Structure of Variant CNC Machines and Remote Checking Directions
3. Definition of Checking Points
4. Internet-Based Checking Method for CAC Machines
5. Internet-Based Checking Method for OAC Machines
6. Scheme and Example of Internet-Based Checking for Variant CNC Machines
7. Conclusion
Acknowledgment
References
참고문헌 (14)
참고문헌 신청
Advantech, 2002, Total Solution for PC-based Automation, Solution Guide Vol.20.
Hong, W.P., Lee, S.W., Choi, H.Z. and Yang, M.Y., 2003, "Simultaneous 3D Machining with Real-Time NURBS Interpolation," KSME International Journal, Vol.17, No.3, pp.336~342.
Hyun, W.K., Chung, S.C. and Shin, D.S., 1998, "Remote Fault Diagnosis and Maintenance System for NC Machine Tools," Journal of KSPE, Vol.15, No.1, pp.19~15.
Jung, M.S., Park, H.S. and Kim, B.S., 2001, "Architecture of Web-based Real-time Monitoring System," Journal of ICASE, Vol.7, No.7, pp.632~639.
Kang, D.C. and Kang, M.J., 1999, "A Study on an Internet-based Remote Diagnosis System for Machine-Tool Failures," Journal of KSPE, Vol.16, No.9, pp.75~81.
Hong, W.P., Lee, S.W., Choi, H.Z. and Yang, M.Y., 2003, "Simultaneous 3D Machining with Real-Time NURBS Interpolation," KSME International Journal, Vol.17, No.3, pp.336~342.
Hyun, W.K., Chung, S.C. and Shin, D.S., 1998, "Remote Fault Diagnosis and Maintenance System for NC Machine Tools," Journal of KSPE, Vol.15, No.1, pp.19~15.
Jung, M.S., Park, H.S. and Kim, B.S., 2001, "Architecture of Web-based Real-time Monitoring System," Journal of ICASE, Vol.7, No.7, pp.632~639.
Kang, D.C. and Kang, M.J., 1999, "A Study on an Internet-based Remote Diagnosis System for Machine-Tool Failures," Journal of KSPE, Vol.16, No.9, pp.75~81.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
서로 다른 CNC 환경을 갖는 공작기계의 인터넷 기반 점검
한국생산제조학회 학술발표대회 논문집
2004 .04
-
A Scheme on Internet-based Checking for Variant CNC Machines in Machine Shop
제어로봇시스템학회 국제학술대회 논문집
2004 .08
-
개방형 컨트롤러를 갖는 공작기계에 적합한 진단 및 신호점검사례
한국생산제조학회 학술발표대회 논문집
2004 .10
-
Diagnosing the Cause of Operational Faults in Machine Tools with an Open Architecture CNC
Journal of Mechanical Science and Technology
2005 .08
-
소프트웨어 기반의 개방형 제어기에 대한 이해와 개발
Journal of the Korean Society for Precision Engineering
2005 .04
-
CNC 가공 모니터링 시스템
한국정밀공학회 학술발표대회 논문집
2014 .10
-
Ubiquitous-Based Mobile Control and Monitoring of CNC Machines for Development of u-Machine
Journal of Mechanical Science and Technology
2006 .04
-
CNC 공작기계의 공정계획 및 모니터링 데이터에 대한 인터페이스 및 응용 방안 연구
한국정밀공학회 학술발표대회 논문집
2017 .05
-
CNC 기능을 이용한 공작기계의 소비에너지 모니터링에 관한 연구
한국정밀공학회 학술발표대회 논문집
2015 .05
-
고속 지능형 CNC 시스템의 안정화
한국생산제조학회 학술발표대회 논문집
2004 .04
-
Mobile and remote operation for M2M application in upcoming u-manufacturing
Journal of Mechanical Science and Technology
2008 .01
-
다계통 e-CNC 장치의 성능평가 기술 및 적용
Journal of the Korean Society for Precision Engineering
2009 .04
-
CNC 제어기와 서보시스템의 연결방식에 따른 특성조사
제어로봇시스템학회 국내학술대회 논문집
1993 .10
-
Design and Development of an Open Architecture CNC Controller for Milling Machine Retrofitting
제어로봇시스템학회 국제학술대회 논문집
2009 .08
-
실시간 제어에 의한 개방형 CNC 소프트웨어 모듈의 설계 및 구현
한국공작기계학회지
1999 .10
-
병렬기구형 CNC 공작기계의 개발 ( Development of a Parallel-Typed CNC Machine )
대한기계학회 춘추학술대회
2000 .01
-
공작기계용 Computer 수치제어(CNC) 장치의 설계기술 동향
제어로봇시스템학회 국내학술대회 논문집
1986 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-550-014529131