메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 대한건축학회논문집 - 구조계 제21권 제10호
발행연도
2005.10
수록면
95 - 102 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
Even though a flat plate system has many advantages such as reduced building height and various plan, it has a dangerous factor like punching failure. And the flat plate system (a gravity-force-resisting system) is deformed with the deformation of a lateral-force-resisting system including a shear wall or a special moment frame. This means that the system should fulfill the sufficient drift capacity when severe winds or earthquakes occur. However, there are not enough experimental results about the behavior of flat plates (especially about the post-tensioned flat plates) under vertical and lateral loads. As a result of this and punching failure, nowadays the flat plate system is hardly used in Korea. So in this study, it was undertaken to investigate the comparison of the structural behavior of the post-tensioned flat plate and the reinforced concrete flat plate interior joints subjected to gravity and uniaxial loads. This study shows that both the RC flat plate and the PT flat plate are good for resisting the loads, and in particular, the PT flat plate is superior to the RC flat plate in terms of ductility, controlling crack, postponing stiffness deterioration, energy dissipation, etc.

목차

Abstract

1. 서론

2. 기존 연구

3. 실험

4. 실험 결과

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-018172730