메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1995年度 하계학술발표 논문집
발행연도
1995.6
수록면
53 - 58 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (9)

초록· 키워드

오류제보하기
Heat transfer performance affected by condensate is studied for condensation of R-11 on horizontal integral-fin tubes. Eight tubes with trapezoidally shaped integral fins having fin density from 748fpm to 1654fpm and 10, 30 grooves are tested. The liquid retention angles are measured by height gauge.
The average retention angle increases with the inclease of both surface tention-to-density ratio(σ/р) and fin density(fpm). The tube having a fin density of 1299~1654fpm has the best heat transfer performance. In this case, the amount of surface flooding ranges are 32~40%. Hence, for the best heat transfer performance in condensation, the amount of surface flooding must maintain under the range of 32~40%. Refrigerants having high value of σ/р(water, NH₃ etc.), fin density must be small while refrigerants having low values of σ/р(R-11, R-22 etc.), fin density must be large.

목차

ABSTRACT

1. 서론

2. 이론 해석

3. 실험 장치 및 방법

4. 결과 및 고찰

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015388182