메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1998년도 하계학술발표회 논문집(Ⅲ)
발행연도
1998.6
수록면
1,512 - 1,517 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (7)

초록· 키워드

오류제보하기
Analysis was carried out to study the heat transfer characteristics of a high temperature regenerator for 150 RT LiBr-water absorption heat pump. Experimental results were compared with the analyzed results and gave good agreement for four sections to quantify the heat transfer rate of each section. Radiative heat transfer from the flame was considered to calculate the heat transfer in combustion chamber(section 1) and the convective heat transfer from the combustion gas to tubes would be the main mechanism of heat transfer at the tube sections. In the present study, the well-established empirical formula was used with the modified parametric constants for the convective heat transfer around tube bundles. The vapor generation rate of the section 2 was three times larger than that of section 3, which could be explained by the direct radiation from the flame to the first two rows of tubes in the section 2. In the finned-tube section 4, the measured heat transfer was less than half of that in section 3. The convective heat transfer is not small considering the five times larger area with the fin area. However the heat transfer rate of the liquid side could be too small because of its natural convection mode.

목차

Abstract

1. 서론

2. 실험장치 및 방법

3. 열전달 해석

4. 실험 결과와의 비교

5. 결론

감사의 글

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015396520