메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2000년도 하계학술발표회 논문집(Ⅰ)
발행연도
2000.6
수록면
62 - 65 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Evaporative heat transfer characteristics of R-22 in micro-fin tubes before and after tube-expansion have been investigated. Single-grooved micro-fin tubes with outer diameter of 9.52 ㎜ were used as test sections, and they were uniformly heated by applying direct current to the test tubes. The saturation temperature of refrigerant was calculated from the inlet and outlet refrigerant pressures by using an equation of state. Inner wall temperature was calculated from the outer wall temperature which was measured using T-type thermocouples and thermopiles, accounting for heat generation in the tube and heat conduction through the tube wall. Experiments were conducted at mass flow rates of 20 and 30 ㎏/hr and mass fluxes of 100 and 150 ㎏/㎡s. For these mass flow rates or mass fluxes, evaporation temperature was set at 5 and 15℃ and heat flux was changed from 6 to 11 ㎾/㎡. The evaporative heat transfer coefficient of micro-fin tubes after tube-expansion decreased because of the change of fin shape and the enlargement of inner diameter compared to that before expansion. The evaporative heat transfer coefficient of the micro-fin tube after expansion was 19.9% smaller on the average than that before expansion.

목차

ABSTRACT

1. 서론

2. 실험장치 및 방법

3. 실험결과 및 고찰

4. 결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015398448