메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2001년도 동계학술발표회 논문집
발행연도
2001.11
수록면
145 - 150 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
The effect of tube diameter on boiling heat transfer for R-22 were measured in horizontal micro-channels. The test section is stainless steel tube, inner tube diameter are 1.8 ㎜ and 2.8 ㎜, the respective length is 1500 ㎜ and 3000 ㎜. The range of mass flux is 300~600㎏/㎡s, and heat flux is 5~15㎾/㎡. The effects of inner tube diameter were clearly observed. Namely, the measured pressure drop inside 1.8 ㎜ I.D. is higher than 2.8 ㎜ I.D. with increasing the mass flux and heat flux. Also, the measured local heat transfer coefficient inside 1.8 ㎜ I.D. is higher than 2.8 ㎜ I.D. in the range of high qualities, a relatively high mass flux and heat flux. But the size of inner tube diameters did not affection heat transfer coefficient in the range of low qualities.

목차

ABSTRACT

1. 서론

2. 실험장치 및 방법

3. 실험데이터의 정리

4. 실험결과 및 고찰

5. 결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015418509