지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.20 No.5
- 발행연도
- 2006.5
- 수록면
- 583 - 590 (8page)
이용수
초록· 키워드
오류제보하기
It is hard to inspect the state of lubrication of an automobile transmission visually. Thus, it is necessary to develop a new inspection method. Wear debris can be collected from the lubricants of an operating transmission of an automobile, and its morphology will be directly related to the friction condition of the interacting materials from which the wear debris originated in the lubricated transmission. In this study, wear debris in lubricating oil are extracted by membrane filter (0.45 ㎛), and the quantitative values of shape parameters of wear debris are calculated by digital image processing. These shape parameters are studied and identified by an artificial neural network algorithm. The results of the study may be applicable to the prediction and diagnosis of the operating condition of transmission gear.
목차
Abstract
1. Introduction
2. Experimental Detail
3. Results and Discussion
4. Conclusions
References
참고문헌 (10)
참고문헌 신청
Ahn, H. S., 1992, "Speculation of Friction and Machine Health Monitoring by Lublicant Analysis," KSME (in korea), Vol.32, No.11, pp.917~926.
Dawes, C. and Tranter, D. F., 1982, "Nitrotec Surface Treatment - its Development and Application in Design and Manufacture of Automobile Component," Heat Treatment of Metals, 9, 1982, pp.85~90.
Dawes, C., 1991, "Nitrocarburising and its Influence on Design in the Automotive Sector," Heat Treatment of Metals, 18, pp.19~30.
Hunt, T. M., 1996, Condition Monitoring of Mechanical and Plant, Chapman & Hall, pp.48~53
Ko, Y., 1984, "Measurements of Power Losses in Automobile Drive Train," SAE Paper, 840054.
Dawes, C. and Tranter, D. F., 1982, "Nitrotec Surface Treatment - its Development and Application in Design and Manufacture of Automobile Component," Heat Treatment of Metals, 9, 1982, pp.85~90.
Dawes, C., 1991, "Nitrocarburising and its Influence on Design in the Automotive Sector," Heat Treatment of Metals, 18, pp.19~30.
Hunt, T. M., 1996, Condition Monitoring of Mechanical and Plant, Chapman & Hall, pp.48~53
Ko, Y., 1984, "Measurements of Power Losses in Automobile Drive Train," SAE Paper, 840054.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
지능이론을 이용한 자동차 트랜스미션 소재의 마찰조건 판정
한국트라이볼로지학회 학술대회
2004 .11
-
유압구동 부재의 마찰 상태 식별에 관한 연구
한국트라이볼로지학회 학술대회
2002 .05
-
Shape Study of Wear Debris in Oil-Lubricated System with Neural Network
KTS International Journal
2001 .06
-
유압 피스톤 모터용 습동재료의 마찰상태 추정에 관한 연구
대한기계학회 춘추학술대회
2002 .10
-
Study on Quantitative Analysis of Wear Debris for Surface Modification Layers Ti(C,N) with Piston Ring on Diesel Engine Oil
Journal of Advanced Marine Engineering and Technology (JAMET)
2009 .11
-
자동차 수동 변속기어의 파손과정 해석시스템의 개발
한국자동차공학회 지회 학술대회 논문집
2000 .03
-
트랜스미션 기어용 소재의 열처리 조건에 따른 마멸특성 평가
한국트라이볼로지학회 학술대회
2003 .06
-
A Study on Statistical Classification of Wear Debris Morphology
KTS International Journal
2001 .06
-
Wear Debris Analysis using the Color Pattern Recognition
KTS International Journal
2000 .06
-
Neural Network에 의한 기계윤활면의 마멸분 해석 ( Analysis of Wear Debris on the Lubricated Machine Surface by the Neural Network )
Tribology and Lubricants
1995 .09
-
핵연료봉 프레팅의 마멸입자 거동에 미치는 접촉형상의 영향
대한기계학회 춘추학술대회
2009 .11
-
마멸입자 형태분석에 의한 자동차 트랜스미션 기어의 손상상태 평가 ( Estimation of Damage Condition for the Automobile Transmission Gear by Morphological Analysis of Wear Debris )
Tribology and Lubricants
2001 .02
-
화상처리에 의한 윤활운동면의 마멸분 해석
한국정밀공학회 학술발표대회 논문집
1996 .06
-
기계윤활 운동면의 작동상태 진단을 위한 마멸분 해석 ( Analysis of Wear Debris for Machine Condition Diagnosis of the Lubricated Moving Surface )
대한기계학회 논문집 A권
1997 .05
-
토석류 실험을 위한 3D 프린터를 활용한 사방시설 모형제작에 관한 연구
한국지반환경공학회 학술발표회논문집
2015 .09
-
윤활운동면의 작동조건에 따른 마멸분 화상해석
Journal of the Korean Society for Precision Engineering
1997 .05
-
기계윤활운동면의 작동상태 진단을 위한 마멸분 형태해석 ( The Morphology Analysis of Wear Debris for Operating Condition Diagnosis of the Lubricated Machine Moving Surface )
대한기계학회 춘추학술대회
1996 .01
-
LOW COST DEBRIS ANALYSIS FOR INDUSTRIAL MACHINERY CONDITION EVALUATION
한국트라이볼로지학회 학술대회
2002 .10
-
윤활운동면의 작동상태에 따른 마멸분 화상해석 ( Image Analysis of Wear Debris on Operating Condition of Lubricated Machine Surface )
한국트라이볼로지학회 학술대회
1996 .11
-
A Study of Moving Distance of Ricocheted Debris for Various Debris Shape with Air Drag Coefficient
Journal of the Korean Society for Precision Engineering
2020 .03
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-550-015505084