메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국해양공학회 한국해양공학회지 한국해양공학회지 제16권 제4호
발행연도
2002.8
수록면
42 - 47 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper describes the effect of loading rate, specimen geometries and material properties for Mode Ⅱ interlaminar fracture toughness of hybrid composite by using end notched flexure(ENF) specimen. In the range of loading rate 0.5~2㎜/min, there is found to be no significant effect of loading rate with the value of critical energy release rate(G<SUB>ⅡC</SUB>). There is no dependence of the interlaminar fracture energy upon the specimen width over the specimen widths examined. The value of G<SUB>ⅡC</SUB> for variation of initial crack length are nearly similiar values when material properties are CF/CF and GF/GF, however, the value of G<SUB>ⅡC</SUB> are highest with the increasing intial crack length at CF/GF. The values of G<SUB>ⅡC</SUB> for variation material properties are higher with the increasing moulding pressure when moulding pressures are 307, 431, 585㎪. The SEM photographs show good fiber distribution and interfacial bonding of hybrid composites when the moulding is the CF/GF.

목차

ABSTRACT
1. 서론
2. 재료 및 실험방법
3. 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-559-015528177