지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
ABSTRACT
1. Introduction
2. Experimental Procedures
3. Results and discussion
4. Conclusions
Acknowledgements
References
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
PROPERTY OF FRICTION STIR WELDED 2024-T3 ALUMINUM ALLOY
기타자료
2008 .09
마그네슘합금(AZ31) 마찰교반용접부의 저면부 미세결함 비파괴평가
대한용접학회 특별강연 및 학술발표대회 개요집
2008 .05
Friction stir Welding에 의한 5083 Al합금의 접합부 특성 ( Joint properties of Friction Stir welded 5083 Al alloy )
대한용접학회 특별강연 및 학술발표대회 개요집
2001 .01
Effect of tool geometry and process parameters on mechanical properties of friction stir spot welded dissimilar aluminum alloys
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .11
Corrosion Behavior of Arc Weld and Friction Stir Weld in Al 6061-T6 Alloys
Corrosion Science and Technology
2006 .01
Fatigue Analysis of Friction Stir Welds in Aluminum Alloys Using a Robust Mesh Insensitive Structural Stress Method
대한용접학회 특별강연 및 학술발표대회 개요집
2012 .05
Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium
대한용접·접합학회지
2017 .08
반복겹침접합압연에 의한 이종/다층 알루미늄합금 판재에 대한 마찰교반용접
한국정밀공학회 학술발표대회 논문집
2011 .06
마찰교반접합된 니켈기 초합금의 기계적 특성
한국재료학회지
2011 .01
Corrosion Resistance of AZ31 Mg-Alloy Friction Stir Spot Welds
대한용접학회 특별강연 및 학술발표대회 개요집
2012 .05
Effect of post weld heat treatment on microstructure and mechanical properties of friction stir welded Cu-alloy joints
대한용접학회 특별강연 및 학술발표대회 개요집
2018 .11
Friction stir welding with back-bead to improve fatigue strength
대한용접학회 특별강연 및 학술발표대회 개요집
2007 .11
Relationships between weld pitch, spindle torque, weld shape and microstructure during friction stir welding of Al alloy
대한용접학회 특별강연 및 학술발표대회 개요집
2012 .05
이종 Al 합금(A5052/A5J32)의 마찰교반접합에서 기계적 성질에 미치는 재료 배열 위치의 영향
대한용접학회 특별강연 및 학술발표대회 개요집
2008 .05
Mechanical properties and microstructures in a friction stir welded lap joints of Al6061-T6 aluminum alloy and SS400 mild steel
대한용접학회 특별강연 및 학술발표대회 개요집
2012 .05
Cu-Be 합금의 미세 조직 및 기계적 특성에 미치는 마찰교반용접 후 열처리의 영향
한국정밀공학회 학술발표대회 논문집
2017 .05
알루미늄 합금의 마찰교반점용접에서 두 가지 공구형상에 따른 기계적 물성치 영향 연구
한국정밀공학회 학술발표대회 논문집
2016 .05
Strengthening Technique of Weld-bonded Joint in Aluminum Alloy
대한용접학회 특별강연 및 학술발표대회 개요집
2012 .05
마찰교반접합법에 의한 알루미늄 6061 합금의 접합부 특성 ( Joint properties of Friction Stir welded aluminum alloy 6061 )
대한용접학회 특별강연 및 학술발표대회 개요집
2001 .01
0