메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Attempts have been made to increase the effective damping in building systems. One of the attempts is mass type vibration control devices such as TMD, AMD which transmit inertial force to the building to reduce its motion. But Spacing restrictions will not permit traditional TMD configurations, requiring the installation of alternative configuration, including inverted pendulums, systems with mechanically-guided slide tables and laminated rubber bearings. In this study, a method to reduce the size of TMD is provided. The method is to control the stoke of TMD by increasing dry friction between moving mass and support frame of TMD as it move far from neutral points. Numerical simulation shows that the stoke of TMD is reduced but the performance is almost the same in case the friction is rapidly increased in the range of the end of stroke. The reason is that control force generated by TMD inertia is nearly correlated with the magnitude of the stroke. It means that the control force is very small at the end of stroke.

목차

Abstract
1. 서론
2. 제진장치 이송거리 설계
3. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-017418526