메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第22卷 第11號
발행연도
2006.11
수록면
149 - 156 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Photocatalyst reaction has limit of its usage because application range mostly centered on atmosphere purification area. Thus, it is true that an alternative plans are necessary to increase usage of TiO₂ as photocatalyst material.
(1) The result of flow test according to TiO₂ replacement rate has shown that both of anatase type and rutile type over 12% deviated from desired flow, 110±5㎜. Consequently, the range below 9% will be suitable when the anatase type TiO₂ is used for functional additives if workability is considered.
(2) After compressive strength test, replacement rate 6-9% is estimated as suitable range if TiO₂ is used as compressive strength material. Rutile type and anatase type are suitable for in early-age strength and long-age strength respectively.
(3) It was revealed that bending strength was dramatically decreased when replacement rate was increased. The main reason were the increase of TiO₂ doesn't influence hydration reaction and the decrease of bending strength.
(4) The result from the water purification properties test using ion-chromatograhpy has shown that the condition with anatase type TiO₂ was normally better than rutile type on the same replacement rate.

목차

Abstract
1. 서론
2. 실험
3. 실험결과 및 분석
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-017494653