메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 60주년 기념 춘계학술대회 강연 및 논문 초록집
발행연도
2005.5
수록면
2,016 - 2,021 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Flow boiling heat transfer in a microchannel has been experimentally studied. The experimental apparatus consisted mainly of peristaltic pump, pre-heater, test section and vacuum chamber for control of operating pressure. Deionized water was used as the working fluid and a single round microchannel of 310 ㎛ inside diameter, made of 304 stainless steel, is used for the test tube. The experiment has been performed for the condition of heat flux from 35 to 86 kW/㎡, mass flux from 203 to 305 kg/㎡s (Re=168~254) and exit pressure from 11 ㎪ to 20 ㎪. The experimental results showed that the flow boiling heat transfer coefficients in microchannel were affected by heat flux and operating pressure, while slightly dependent on mass flux.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016055032