메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
전력전자학회 ICPE(ISPE)논문집 2007년 ICPE논문집
발행연도
2007.10
수록면
1,167 - 1,172 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Connecting Distributed Generations (DGs) into distribution system has presented a challenge of controlling voltage profile in distribution system. In the presence of DGs, voltage profile of distribution system becomes non-uniform and may result in large voltage fluctuation at loads. Therefore, there is need for strict limitation on power injected by DGs. This paper proposes an effective method to overcome the problem of increase/decrease of voltages in distribution system due to the presence of DGs, and it also results in higher permissible power injected by DGs. The proposed method solves the problems by firstly, changing radial to loop distribution configuration. Then secondly, by using series type Back-To-Back (BTB) converter to control voltage profile of the resulting loop distribution system. Two control nodes in the loop distribution system are used to control the voltage profile. The series type BTB converter is installed at the sending end voltage node of loop feeder. The effectiveness of the proposed method is shown by the improvement of voltage profile and the small size of series type BTB converter. Theoretical analysis is discussed and simulation results are shown to verify the proposed method.

목차

Abstract
Ⅰ. INTRODUCTION
Ⅱ. SERIES TYPE BTB CONVERTER FOR CONTROLLING VOLTAGE IN DISTRIBUTION SYSTEM
Ⅲ. CONTROL SYSTEM DESIGN FOR SERIES TYPE BTB CONVERTER
Ⅳ. SIMULATION MODEL
Ⅴ. CONCLUSION
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-016307739