메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국동력기계공학회 한국동력기계공학회 학술대회 논문집 2007年度 春季學術大會 論文集
발행연도
2007.6
수록면
365 - 372 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The studies about hydrogen fuel which consist of hydrogen extraction and reforming process, fuel cell equipment, and receptacle are flourishing all over the world. But, Korean hydrogen station is still underdeveloping. And also a hydrogen compressor which is the most important part at the hydrogen station, has not been developed. Snubber is one of the most important parts in hydrogen compressing system. Snubber has function to reduce pulsation waveform and to remove the impurities in the hydrogen gas. A snubber has an inclined plate as a buffer, which is installed inside snubber. When the pressure loss and the pulsation of pressure within a snubber is minimized, the snubber could get more applicability. Therefore, a study to find an optimum geometric size on a several snubbers which have different buffer width, has been conducted using a numerical analysis. The numerical results show the special characters of snubber according to various buffer angle. The minimum pressure loss ratio occurs when the buffer angle is 35. and the minimum pressure pulsation ratio occurs when the buffer angle 10.

목차

Abstract
1. INTRODUCTION
2. EXPERIMENTAL SETUP AND METHOD
3. NUMERICAL ANALYSIS AND METHOD
4. SIMULATION FOR VARIOUS SNUBBER TYPES
5. RESULT AND DISCUSSION
6. CONCLUSION
ACKNOWLEDGEMENTS
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-014963122