메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한건축학회 대한건축학회 학술발표대회 논문집 - 구조계 대한건축학회 2007년도 학술발표대회 논문집 - 구조계 제27권 제1호
발행연도
2007.10
수록면
317 - 320 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A merit of the Strut-Tie model concept may be that the design engineer grasps the flow of the force in the RC members and proposes the rational reinforcing recipe through the representation process of the natural force flows. With these advantages the application of this method seems like quite easy and practical. However, if one will applies the model for the design practice, he will immediately notice several difficulties, e.g. a number of calculation steps according to the design scheme under some initial assumptions which should be checked only after several strenuous computation steps. Additionally, the result of design using Strut-Tie model indicates in some cases remarkable discrepancy with them using other building codes.
The aim of this paper is to improve the applicability of the Strut-Tie model, especially for the deep beam design. For this purpose, the simply supported deep beam subjected to the uniformly distributed load was considered. As the main investigation parameter, the height-span ratio of the beam was chosen. The influence of the column-width ratio on the maximum bending moment was systematically investigated. As examples several deep beams are analyzed in which the design parameters were chosen from practical affairs of housing-commercial combined buildings from 20 to 40 stories.

목차

Abstract
1. 서론
2. 최대휨모멘트 분석
3. 스트럿-타이 모델 해석
4. 스트럿-타이 모델 설계 예
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-014970327