메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
李在福 (한국전기연구원) S. V. Shenderey (한국전기연구원) 張錫勳 (한국전기연구원) 明聖鎬 (한국전기연구원) 趙延奎 (한국전기연구원)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제57권 제10호
발행연도
2008.10
수록면
1,822 - 1,828 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents design parameter calculation methodology and its realization to construction for the 10/350㎲ lightning impulse current generator(ICG) modelled as double exponential function waveform with characteristic parameters α, β. Matlab internal function. "fzero" was applied to find λ=α/β which is solution of nonlinear equation linearly related with two wave parameter T₁ and T₂. The calculation results for 10/350 ㎲ lightning impulse current show very good accuracy with error less 0.03 %.
Two type of 10/350 ㎲ ICGs based on the calculated design circuit parameters were fabricated by considering the load variation. One is applicable to the MOV based Surge protective device(SPD) for less 15 ㎄ and the other is to test small resistive devices such as spark gap arrester and bonding device with maximum current capability 30 ㎄.
The tested waveforms show error within 10 % in comparison with the designed estimation and the waveform tolerance recommended in the IEC 61643-1 and IEC 60060-1.

목차

Abstract
1. 서론
2. 회로설계 파라미터 계산
3. 회로 설계
4. ICG의 성능
5. 결론
감사의 글
참고문헌
저자소개

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-019069869