메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 추계학술대회 강연 및 논문 초록집
발행연도
2009.11
수록면
460 - 464 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Shrouded impeller consisting of a cover attached to top of the blades has complicated irregular cross sections. The blades distribute its centrifugal load into the wheel and fillet area in a very non-uniform manner which depends upon its own pattern of deflection of the disk along its interface. Therefore, full 3D structural analysis should be performed in order to calculate von-mises stresses and compared with its allowable stresses at certain sections. Additionally, to determine dynamic characteristics of the impeller, a modal analysis was performed. Vibration characteristics of the impeller must be investigated in detail to prevent high cycle fatigue and rubbing due to interaction of impeller blade tips with stationary inlet as a result of excessive vibration. Subsequently, Campbell diagram was constructed to ensure there’s no resonant failures up to 34k harmonics. According to results, stress safety margins are below criteria and none of the impeller frequencies intersect with 1~12k engine order for the operational range of impeller speed at 12,840 rpm.

목차

Abstract
1. 서론
2. 형상 및 이론적 고찰
3. 구조응력 및 진동해석
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-019126583