메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
문성민 (부산대학교) 장정환 (부산대학교) 주병돈 (부산대학교) 손영명 (부산대학교) 문영훈 (부산대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 추계학술대회 강연 및 논문 초록집
발행연도
2009.11
수록면
1,187 - 1,192 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Direct laser melting technologies have been used to restore the damaged mold surface. The objective of this research work is to investigate hardness and wear-resistance of the restored mold steels. A detailed wearresistance analysis using a Pin-on-Disk (POD) testing machine compares the wear rate and the friction coefficient for various test specimens, such as the as-received AISI H13 steel, the direct melted surface without powder, the direct melted surface with Fe-Cr powder and Fe-Ni powder. Experimental results show that the micro-hardness of the melted layer is approximately 2.3 times higher than the measured hardness of the as-received specimen. The melted layer of metal powder shows the frictional reduction effect more than 10%. The wear resistance of melted layer is about 2.3 times higher than that of as-received specimen.

목차

Abstract
1. 서론
2. 실험 방법
3. 실험 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-019125122