메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 추계학술대회 강연 및 논문 초록집
발행연도
2009.11
수록면
1,375 - 1,380 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Generally, leakage in high pressure hose assembly can be determined by that hydraulic fluid falls down through fitting which is swaged with rubber hose. The leakage which is the failure phenomenon occurred often in hydraulic system was tried to prevent. In the case of methods which verify leakage paths in power steering hydraulic system equipped with high pressure hose assembly, three types of leakage paths which can be seen by cutting the swaging part can be generally experienced. However, it was difficult to find out leakage paths using power steering oil. In this study, four methods which are thermal burn image method, hole drilling method of fitting metal, white paint infiltration method, and fluorescent infiltration method were tried to introduce. Fluorescent infiltration method could verify leakage path with the unaided eye simply to hold the cutting swaging part closely to the ray of light. Reappearance test methods in high pressure hose assembly, which are hole drilling, white paint infiltration, and fluorescent infiltration method, can be applied to find failure mode and to approval test before mass production of high pressure hose.

목차

Abstract
1. 서론
2. 본론
3. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-019124776