메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
권기환 (충남대학교) 제태진 (한국기계연구원) 유영은 최두선 박영우
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2009년도 추계학술대회 강연 및 논문 초록집
발행연도
2009.11
수록면
3,082 - 3,085 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
Various micro-patterns are recently adapted to many product due to their good optical or mechanical properties and the aspect ratio of the pattern has increased for better performance. The forming or molding process, however, becomes more difficult especially due to higher releasing force for the higher aspect ratio of pattern. Many good designs for micro-pattern could not be applied for commercialized product due to mainly this processing issues. In this paper, releasing forces were measured experimentally and analyzed for several major processing parameters such as releasing speed, starting point(curvature shape) material characteristic. For experiment, micro-pattern, 40㎛ wide and 200㎛ deep, was machined on the brass block which is 50㎜×50㎜ and UV curabel resin was used as a molding material. The UV resin was coated on the PET film and micro pattern was formed on the coated UV resin layer using the pattern master. After curing the UV resin, releasing force was measured by 90 peeling test using tension tester. From a series of this releasing experiment, some effects of the processing parameters on releasing force could be figured out.Put

목차

Abstract
1. 서론
2. 실험 준비 과정
3. 이형력 측정 실험
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-019131288