메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Recently, restrictions of performance, environment and noise on the oil hydraulic system of the heavy construction equipment have been reinforced continuously, so in order to solve these problems, studies on compactness of the ystem, operation under high rotating speeds and pressure, electronic control, substitute oil, and noise reduction have progressed briskly.
Of these recent studies, the operation of the system under high pressure has been studied continuously; however, the realization of it is very difficult due to mechanical limitations.
For the operation of the hydraulic pump under high pressure, design techniques, manufacturing techniques, and improvement of lubrication performance of the working oil are required. In this study, in order to respond to this demand for high pressure, the stress distribution and optimum design factors under the Max. pressure were discussed through stress analysis of the valve plate of the hydraulic axial piston pump, which is one of the most important relative sliding regions.

목차

ABSTRACT
1. INTRODUCTION
2. MODELING AND ANAL YSIS
3. Result and Discussions
4. CONCLUSION
5. NOMENCLATURE
6. REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-551-002319016