메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이남수 (경상대학교) 박원조 (경상대학교) 박성호 (경상대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2006년도 추계학술대회 논문집
발행연도
2006.11
수록면
57 - 62 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Nowadays, the steel material part used at the automobile and aerospace industries are require to be used lightweight parts. therefore, used material steel have to be a high stress and light, which is an indispensable condition in this field. aluminum alloy is very light and high stress. but many industries are require to more mechanical characteristic. so we need to development research about the aluminum alloy. there are many way for enhance mechanical characteristic of the aluminum alloy. we used the shot peen ing as way of the enhance mechanical characteristic. The wear test is one of important factors which evaluate the life of the machine. the surface conditions are measured to know the influence wear characteristics by shot peening and influence on material durability wear and friction by shot velocity. test result show the wear characteristics were increased by optimum peening condition. but the wear characteristic were decreased by under peening or over-peening condition.
In this study, used a ball on disk type experiment to measure wear less and friction. shot velocity are 40m/s,50m/s 70m/s and used specimen are A17075- T6 and A16061- T651.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-003081638