메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Ki-Joong Kang (순천대학교) Ju-Yong Park (순천대학교) Kee-Man Lee (순천대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2010년도 열공학부문 춘계학술대회 논문집
발행연도
2010.5
수록면
102 - 108 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Experimental measurements of flame shape and heat transfer characteristics were performed for impinged inverse diffusion flames (IDF) using propane. The purpose of this experiment is to identify the favorable co-axial inverse diffusion flame structure for impingement heating. The flame consisted of an entrainment zone and mixing and combustion zone. The heat flux which represents heat transfer rate is measured by using a heat flux sensor that is located at the center of the impingement plate. The inverse diffusion flame structure has been classified into six groups. In these groups, several favorable flames for impingement heating were identified. In this study, the parameters are overall equivalent ratio, nozzle to impingement plate distance, vertical distance from the stagnation point and Re of air.

목차

Abstract
1. Introduction
2. Experimental Set-up and Method
3. Shape of IDF
4. Heat flux distribution of impinging IDF
5. Conclusion
Acknowledgment
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-003006795