메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
백승세 (전북대학교) 이송인 (전북대학교) 권일현 (전북대학교) 홍경태 (한국과학기술원) 유효선 (전북대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2001년도 제2차 재료 및 파괴부문 학술대회 논문집
발행연도
2001.8
수록면
350 - 354 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (8)

초록· 키워드

오류제보하기
Recently, to increase the efficiency of high temperature/pressure plant, steam pressure is schedule to increase to super critical pressure(24.1 MPa). So high alloy steels such as 9~l2%Cr steel have been recommended as proper material to endure such severe condition. But, few creep properties have been evaluated for degraded material of the high alloy steels. In this study, SP-Creep test which is a micro-test method has been applied to evaluate creep properties for degraded 9Cr steel. Micro-Vickers hardness of 9Cr steel. decreases with increasing aging time. From the SP-Creep test, the overall creep curves of each degraded materials are shown typical three stages creep behavior and distinctly depended on applied load. The relationship between creep rate or rupture time and applied load shows the power law as that of uniaxial creep test. And the load exponents show the wide range value with 1~12. The elongated dimple creep fractography is also shown with increasing applied load.

목차

Abstract
1. 서론
2. 실험재료와 실험방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-002784881