메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
주은희 (티브이에스포럼) 김상모 (티브이에스포럼) 강지연 (SH공사) 김형근 (SH공사) 박홍근 (서울대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第27卷 第3號
발행연도
2011.3
수록면
31 - 38 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study was to evaluate the structural performance by experiments through void former installation methods of hollow core slab using deck plate. Bending strength of horizontal types were almost the same strength with solid type. but vertical and mixed types were sufficient bending strength about 85% of horizontal types and appeared shear failure modes. Shear strength of horizontal types were evaluated about 50% of existing slab, because of insert whether or not void former of slab using V-deck. This was almost proportion value with effective area rate of existing slab and hollow core slab, but vertical type in strength of about 38% compare with none void former type was smaller the effective area ratio. Therefore, according to install vertical type to peanut type void former, Shear strength of slab type solid effort of 30% or less limited to the portion that is considered desirable to use. According to the results of experiment, a similar to flexure stiffness for void slab using truss deck and V-deck. Special regard will be paid to the fact that shear capacity is a rapid decrease to the installation method of void former.

목차

Abstract
1. 서론
2. 중공슬래브의 경량체
3. 실험계획 및 실험방법
4. 실험결과
5. 결론
참고문헌

참고문헌 (13)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-540-004199573