지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2011.4
- 수록면
- 36 - 41 (6page)
이용수
초록· 키워드
오류제보하기
BIPV system that can alternate building envelope by making materials of PV module should be considered in initial design step for applying PV system efficiently in office building.
Meanwhile, area of the building skin also increases as the number of floors increases, but the valid area that can apply BIPV system in effect decreases relatively. Despite of this weak point, installing BIPV system is still being evaluated as the only measure left that can reduce electronic energy consumption in the building.
Therefore, the impact on building energy consumption according to the increase of the number of floors when BIPV system is applied in the building was analyzed. And it will be used as basic information for application of BIPV in office building.
conomic about application of BIPV is interpreted to be secured within the 10 story high. For over the 11 floors, the methods of increasing the contribution ratio produced by BIPV system through the optimization of install angle and increase in install area of south, high efficiency should be considered. The ways to reduce basic load by integrated design with another renewable energy besides BIPV should be found. Later,
the study on the total building energy comsumption with PV generation according to the various type of the basic load and ratio of the width and depth will be performed based on this study.
Meanwhile, area of the building skin also increases as the number of floors increases, but the valid area that can apply BIPV system in effect decreases relatively. Despite of this weak point, installing BIPV system is still being evaluated as the only measure left that can reduce electronic energy consumption in the building.
Therefore, the impact on building energy consumption according to the increase of the number of floors when BIPV system is applied in the building was analyzed. And it will be used as basic information for application of BIPV in office building.
conomic about application of BIPV is interpreted to be secured within the 10 story high. For over the 11 floors, the methods of increasing the contribution ratio produced by BIPV system through the optimization of install angle and increase in install area of south, high efficiency should be considered. The ways to reduce basic load by integrated design with another renewable energy besides BIPV should be found. Later,
the study on the total building energy comsumption with PV generation according to the various type of the basic load and ratio of the width and depth will be performed based on this study.
목차
Abstract
1. 서론
2. BIPV 사무소 건물에너지성능평가 개요
3. BIPV 사무소 층고증가에 따른 에너지소비량
4. 결론
후기
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
고층형 사무소건물의 에너지저감을 위한 효과적인 BIPV 적용방안
윤종호
,
신우철
,
오명환
외 1명
대한건축학회 논문집 - 계획계
2011
.08
공공건물의 신재생에너지시스템 설치의무화에 따른 BIPV 시스템 모듈 현황 분석
엄재용
,
장향인
,
윤성훈
대한건축학회 논문집 - 계획계
2013
.04
건물일체형태양광시스템을 활용한 건물입면 디자인 계획 연구
오현인
,
김덕수
,
윤혜경
대한건축학회 학술발표대회 논문집
2016
.04
초고층 건축물의 BIPV 설계 방안
김회서
설비저널
2011
.09
커튼월 구조 사무소 건물에 설치된 BIPV 발전 특성
박재범
,
강형규
,
권한솔
외 2명
대한설비공학회 학술발표대회논문집
2011
.07
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2012-563-004482450