메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김진희 (공주대학교) 천진아 (공주대학교) 김준태 (공주대학교)
저널정보
한국생활환경학회 한국생활환경학회지 한국생활환경학회지 제18권 제2호
발행연도
2011.4
수록면
206 - 211 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The high temperature of PV modules reduces the efficiency of a PV system. In particular, BIPV systems appear to be more vulnerable to the PV module temperature, as they are attached to building surfaces. The PV-Thermal (PVT) collector is a combination of photovoltaic modules with solar thermal collectors, forming one device that utilizes solar radiation and produces electricity and heat simultaneously. The PVT collector can produce more energy per unit surface area than PV modules or solar thermal collectors. This study compared the experimental performance of an unglazed water-type PVT collector and a conventional poly crystalline Si PV module. The electrical and thermal performances were measured in outdoor conditions, and the results were analyzed. The results showed that the thermal efficiency of the PVT collector was 43% average and its electrical efficiency was 13.1% average, marking a total of 56.1% average, whereas the electrical efficiency of the PV module was 12.7% average. It is found that the electrical efficiency of the PVT module was improved by approximately 3% compared to that of the PV module. This is believed to be due to the heat release of the PV module through the thermal collector.

목차

Abstract
1. 서론
2. Unglazed PVT 복합모듈 설계 및 제작
3. 성능실험
4. 결론
후기
인용문헌

참고문헌 (1)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-590-000580058