메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이정연 (서울시립대학교) 이득행 (서울시립대학교) 김강수 (서울시립대학교) 황진하 (서울시립대학교) 임주혁 (삼성물산) 이진섭 (삼표건설)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第27卷 第5號
발행연도
2011.5
수록면
57 - 67 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
Prestressed concrete structural system is the one of the best alternatives to satisfy deflection requirements for the long and slender span members. Especially, pre-tension member can be precasted at factory that reduces construction waste by minimizing the onsite work and construction duration, which is considered as an eco-friendly and economical structural method. However, the economic efficiency of the pre-tension system heavily depends on the transfer time as the pre-tensioned member need to acquire an proper compressive strength at transfer. Unfortunately, the allowable compressive stresses in many codes of practice are based on only experience without theoretical consideration, which also are often very conservative. To solve out such problems, this research proposed the allowable compressive stress based on ultimate strength design method, considering main variables such as shapes of cross section, intensity of prestress, and eccentricity of tendons.

목차

Abstract
1. 서론
2. 기존연구
3. 현행기준 및 기존연구자들의 제안식비교
4. 허용압축응력계수의 제안
5. 제안식의 검증
6. 결론
참고문헌

참고문헌 (34)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-540-000626228