메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
조영국 (청운대학교) 박동열 (청운대학교) 장길수 (청운대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第27卷 第6號
발행연도
2011.6
수록면
107 - 114 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In general, polymer cement slurry(PCS) that is made from organic polymer dispersion and cement has good adhesion to steel and cement concrete, waterproofness and acid resistance due to being of polymer films formed in cement slurry. The purpose of this study is to evaluate the effects of the mix proportions and coating thickness on the bond strength of coated rebar by PCS. The test pieces are prepared with two types of polymer dispersions such as St/BA and EVA, four polymer-cement ratios, two types of cement and four types of coating thickness, and tested for the bond strength test.
From the test results, bond strength of PCS-coated rebar with St/BA and EVA is better than that of plain rebar and epoxy-coated rebar. In general, it is also high bond strength at polymer-cement ratios of 80% or more, and coating thickness of 100㎛. The maximum bond strength of PCS-coated rebar with ultra high-early strength cement and St/BA at polymer-cement ratio of 80%, and coating thickness of 100㎛ is about 1.5 and 1.6 times respectively, the strength of plain rebar and epoxy-coated rebar. It is apparent that the choice of polymer type, cement type, polymer-cement ratio and coating thickness is important to improve the bond strength of PCS-coated rebar to cement concrete.

목차

Abstract
1. 서론
2. 실험계획 및 방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (6)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-540-000548592