메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
J. N. Mohapatra (Iwate University) Y. Kamada (Iwate University) H. Kikuchi (Iwate University) S. Kobayashi (Iwate University) J. Echigoya (Iwate University) D. G. Park (한국원자력연구원) Y. M. Cheong (한국원자력연구원)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.16 No.2
발행연도
2011.6
수록면
173 - 176 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Fe-Cr alloys with different Cr contents were prepared by an arc melting technique. The alloys were isochronally aged in the range from 400 ℃ to 900 ℃ with 50 ℃ steps with a holding time of 100 hours. The ageing produced embrittlement in the alloys due to either the formation of a Cr-rich α’ phase or a σ phase at high temperatures. Magnetic Hysteresis Loop (MHL) and Micro-Vickers hardness were measured at each step to correlate the magnetic and mechanical properties. Coercivity and hardness of the alloys were increased and remanence decreased up to 500-550 ℃ due to formation of a Cr-rich α’ phase. Beyond 500-550 ℃ range, the coercivity and hardness decreased and remanence increased due to the coarsening or dissolution of the Cr-rich α’ phase. In the Fe-48% Cr alloy, formation of the σ phase at 700 ℃ reduced the maximum induction of the alloy significantly.

목차

1. Introduction
2. Experimental
3. Result and Discussion
4. Conclusion
Acknowledgement
References

참고문헌 (16)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-428-000554324