메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
오성진 (금오공과대학교) 함영복 (한국기계연구원) 박중호 (한국기계연구원) 윤소남 (한국기계연구원) 김성동 (금오공과대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2011년도 춘계학술대회 논문집
발행연도
2011.5
수록면
338 - 341 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A small sized pump using a bimorph type piezoelectric actuator is described in this paper. The design, fabrication and pumping performance of the piezoelectric pump are summarized. The fabricated pump consists of a piezoelectric actuator, two sheet type check valves and pump bodies The overall dimensions of the pump are 43 ㎜ * 43 ㎜ * 13 ㎜. The diaphragm shaped actuator consists of a metal shim and two piezo-ceramic disks. A diameter of 30 ㎜ and thickness of 0.1 ㎜ metal shim was made of bronze. Two piezo-ceramic disks 25 ㎜ in diameter and 0.2 ㎜ in thickness were bonded on topside and bottom of the metal shim. The sheet type check valves to control flow direction in inlet and outlet, with thickness 80 ㎛, were designed and fabricated. The pumping experiments were performed with a tap water as the working fluid. The fabricated piezoelectric pump achieved no-load flow rate of 350 ㎖/min, maximum output pressure of 33 ㎪ at the applied sinusoidal voltage of 300 V<SUB>pp</SUB> and driving frequency of 150 ㎐.

목차

Abstract
1. 서론
2. 압전펌프의 설계 및 제작
3. 압전펌프의 토출특성
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-550-000441265