메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강대민 (부경대학교) 곽재섭 (부경대학교) 최종환 (부경대학교) 박경도 (부경대학교)
저널정보
한국기계가공학회 한국기계가공학회지 한국기계가공학회지 제10권 제4호
발행연도
2011.8
수록면
64 - 69 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (9)

초록· 키워드

오류제보하기
Magnesium alloy has been known as lightweight material in automobile and electronic industry with aluminum alloy, titanium alloy and plastic material. Friction welding is useful to join different kinds of metals and nonferrous metals they are difficult to be joined by such as gas welding, resistance welding and electronic beam welding. In this study, friction welding was performed to investigate optimization process of Mg alloy with a 20㎜ diameter solid bar. For that, the orthogonal array (L9(34)) was used that contained four factors and each factor had three levels. Control factors were heating pressure, heating time, upsetting pressure and upsetting time. Also tensile tests were carried out to measure mechanical properties for welded conditions. The levels of heating pressure and upsetting pressure used were 15, 25, 35㎫, and 30, 50, 70㎫, respectively. In addition those of heating time and upsetting time were 0.5, 1, 1.5 sec and 3, 4, 5 sec., respectively, rotating speed of 2000rpm.
From the experimental results, optimization condition was estimated as follows; heating pressure=35㎫, upsetting pressure=70㎫, heating time=1.5sec, upsetting time=3sec.

목차

ABSTRACT
1. 서론
2. 실험
3. 실험결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (8)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-581-000367650