해수를 산화제로 하는 수반응성 금속 분말 연소 시스템의 금속분말/해수 전단 동축 분사기를 설계하기 위한 기초 연구로, 산화알루미늄 분말 분사 실험을 진행하였다. 이송가스는 공기를 사용하였고, 산화알루미늄 분말의 평균 직경은 74 μm 이다. 단공형 분말 분사기와 함께 분말과 가스의 질량비를 다르게 하기 위하여 스크류를 이용하는 분말 공급 장치를 제작하였다. 분말 연소 특성과 밀접한 관련이 있는 분사 특성인 분말 분산각과 코어 길이에 대한 이송가스/분말 질량비의 영향에 대한 정보를 획득하였다.
For designing the shear coaxial injector of solid particles with water which is a part of combustion system for hydro-reactive solid particles with seawater as the oxidizer, aluminum oxide particles spray tests were performed. Air is used for the carrier gas and mean diameter of the aluminum oxide particles is 74 μm. With jet orifice type particle injectors, particle seeder using a screw was designed to supply different carrier gas/particles mass ratio. Experimental Information was achieved about the effect of carrier gas/particles mass ratio on the particle spray angle and the core length related with particle combustion characteristics.