메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이상섭 (한국건설기술연구원) 박금성 (한국건설기술연구원)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第27卷 第10號
발행연도
2011.10
수록면
39 - 46 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Usually, precast concrete(PC) slabs are designed as simply supported elements with structural topping concrete. However, designing for continuity over supports leads to improved structural capacity and savings in material. In this paper, an experimental and theoretical study on the effect of end filling length on the behavior of invertedly ribbed PC slab is presented. 5 connection specimens having different end filling lengths(0, 300, 600, 900mm and full span) were tested under three point loading to simulate the portion of a continuous span in negative bending moment. Each specimen consists of two invertedly ribbed PC slab components on a supporting beam element and is connected by concrete topping with EPS(expanded polystyrene) installed in the space between the ribs except for the end filling lengths. Test results show that the specimen of 300mm concrete filling length has the flexure-shear combined failure mode. Also the shear strength of specimen with 300mm filling length according to KBC2009 eq.(0507.3.3) could be overestimated at the starting point of EPS.

목차

Abstract
1. 서론
2. 접합부 부모멘트 휨 실험
3. 역 리브 부분 PC 슬래브의 연속슬래브 거동 분석
5. 결론
감사의 글
참고문헌

참고문헌 (8)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-540-000911444