지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.8
- 수록면
- 118 - 124 (7page)
이용수
초록· 키워드
오류제보하기
In this study, we turning mold steel (SKD61) using whisker reinforced ceramic tool (WA1) to get affected factor to surface roughness and regression equation. For this study, we adapt system of experiments. Results are follows; From the analysis of variance, it was found that affected factor to surface roughness was feed rate, cutting speed, depth of cut in order. From multi-regression analysis, we calculated regression equation and the coefficient of determination(R²). R² was 0.978 and It means regression equation is significant. Regression equation means if feed rate increase 0.039㎜/rev, surface roughness will increase 0.8391㎛, if cutting speed increase 50m/min, surface roughness will decrease 0.034㎛, if depth of cut increase 0.1㎜, surface roughness will increase 0.0203㎛. From the experimental verification, it was confirmed that surface roughness was predictable by system of experiments.
목차
ABSTRACT
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 고찰
4. 결론
참고문헌
참고문헌 (10)
참고문헌 신청
1. [학술지(정기간행물)] - E. Belloy / 2001 / Oblique Powder Blasting for Three Dimensional Micromachining of Brittle Materials / Sensors and Actuators 92 : 358 ~ 363
2. [학술지(정기간행물)] - W. Theisen / 2004 / Electro Discharge Machining of Nickel-Titanium Shape Memory Alloys / Materials Science and Engineering 378 : 200 ~ 204
3. [학술지(정기간행물)] - H. S. Kim / 1995 / A Study on the Cutting Characteristics in the Machining of SKD11 by Face Milling / Proceeding of the Korean Society of Precision Engineering 95 : 73 ~ 78
4. [학술지(정기간행물)] - J. S. Park / 2001 / Cutting Characteristics of SiC-based Ceramic Cutting Tools Part 2: Tool Life and Cutting Force Characteristics of SiC-based Ceramic Cutting Tools / Journal of the Korean Society of Precision Engineering 18 (9) : 89 ~ 85
5. [학술지(정기간행물)] - D. G. Ahn / 2000 / Effect of Microstructure on Evaluation of Fracture Toughness and Hardness of Cutting Tool Ceramics / Journal of the Korean Society of Precision Engineering 9 (6) : 170 ~ 177
2. [학술지(정기간행물)] - W. Theisen / 2004 / Electro Discharge Machining of Nickel-Titanium Shape Memory Alloys / Materials Science and Engineering 378 : 200 ~ 204
3. [학술지(정기간행물)] - H. S. Kim / 1995 / A Study on the Cutting Characteristics in the Machining of SKD11 by Face Milling / Proceeding of the Korean Society of Precision Engineering 95 : 73 ~ 78
4. [학술지(정기간행물)] - J. S. Park / 2001 / Cutting Characteristics of SiC-based Ceramic Cutting Tools Part 2: Tool Life and Cutting Force Characteristics of SiC-based Ceramic Cutting Tools / Journal of the Korean Society of Precision Engineering 18 (9) : 89 ~ 85
5. [학술지(정기간행물)] - D. G. Ahn / 2000 / Effect of Microstructure on Evaluation of Fracture Toughness and Hardness of Cutting Tool Ceramics / Journal of the Korean Society of Precision Engineering 9 (6) : 170 ~ 177
이 논문의 저자 정보
이 논문과 함께 이용한 논문
선삭공정의 각도변화가 표면거칠기에 미치는 영향에 관한 기초 연구
김동현
,
최준영
,
이춘만
한국기계가공학회지
2011
.12
티타늄 황삭가공에 있어서 절삭공구의 마모 특성
박승식
,
배명환
,
정화
외 1명
한국자동차공학회 추계학술대회 및 전시회
2013
.11
티타늄 가공의 절삭조건에 따른 가공특성에 관한 연구
김기하
한국기계가공학회지
2013
.02
Al5083 PCD 선삭가공에서 회귀분석에 의한 표면거칠기 예측
이선우
,
이동주
한국기계가공학회지
2012
.12
SCM 415 소재의 절단가공시 절삭조건에 따른 표면조도와 가공특성
김진수
,
신미정
,
강성기
외 1명
한국기계가공학회 춘추계학술대회 논문집
2012
.06
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-581-003322879