지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.10
- 수록면
- 714 - 719 (6page)
이용수
이 논문의 연구 히스토리 (4)
2008
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
In this paper, the polishing force monitoring and the control method were implemented for the polishing machine with the airbag tool. Airbag tool has been known to be adaptable to the curvature variation such as the aspherical and the free-form surface. However, it was necessary to control the tool movement of vertical axis also because of the table rotational wobble and vibration. To solve it by the polishing force control, we installed another stepping motor to the z-axis. And the polishing force was measured with the load cell and controlled by the PID Labview controller. A few hundreds gram of the polishing force were well controlled under 0.8 second of the response time and 5% variation. An experiment was done to clean the edge burrs of the micro channel structure of width 87㎛ using the polishing force control.
목차
Abstract
1. 서론
2. 연마 힘 제어 방법 및 구현
3. 연마 검증 실험
4. 결론
References
참고문헌 (7)
참고문헌 신청
1. [학술지(정기간행물)] - 양민양 / 200109 / Dwell time algorithm for computer-controlled polishing of small axis-symmetrical aspherical lens mold / OPTICAL ENGINEERING 40 (9) : 1936 ~ 1943
2. [학술지(정기간행물)] - Jiao, C / 2009 / Algorithm for Ion Beam Figuring of Low-gradient Mirrors / Applied Optics 48 (21) : 4090 ~ 4096
3. [학술지(정기간행물)] - Kim. D / 2010 / Rigid Conformal Polishing Tool using Non-linear Visco-elastic Effect / Optics Express 18 (3) : 2242 ~ 2257
5. [학술지(정기간행물)] - Deng, Y / 2010 / Study on Force Control in Abrasive Polishing of Aspheric Parts / Applied Mechanics and Materials 37~38 (11) : 1287 ~ 1291
6. [학술지(정기간행물)] - Igarashi, K / 2011 / Buffing Performance Analysis of Viscoelastic Polymer with Sensor-less Polishing Pressure Control / Advanced Materials Research 325 (8) : 482 ~ 488
2. [학술지(정기간행물)] - Jiao, C / 2009 / Algorithm for Ion Beam Figuring of Low-gradient Mirrors / Applied Optics 48 (21) : 4090 ~ 4096
3. [학술지(정기간행물)] - Kim. D / 2010 / Rigid Conformal Polishing Tool using Non-linear Visco-elastic Effect / Optics Express 18 (3) : 2242 ~ 2257
5. [학술지(정기간행물)] - Deng, Y / 2010 / Study on Force Control in Abrasive Polishing of Aspheric Parts / Applied Mechanics and Materials 37~38 (11) : 1287 ~ 1291
6. [학술지(정기간행물)] - Igarashi, K / 2011 / Buffing Performance Analysis of Viscoelastic Polymer with Sensor-less Polishing Pressure Control / Advanced Materials Research 325 (8) : 482 ~ 488
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-552-001020766