현행 살처분 가축사체의 처리방안 중 하나인 랜더링 처리방법을 사용하여 나온 부산물을 액비화 시키기 위해 산 및 알칼리 분해제를 사용하여 액화시켰으며, 분해제별 주입량 및 처리시간에 따른 랜더링 부산물의 분해율과 분해속도를 조사하였다. 산 및 알칼리 분해제별 주입량 및 처리시간에 따른 랜더링 부산물의 잔존량을 조사한 결과 분해제 중 가장 높은 잔존량을 나타낸 것은 HNO₃으로 다른 분해제는 10분이 경과한 후 랜더링 부산물의 잔존량이 대부분 50% 이하로 나타났다. 랜더링 부산물의 분해속도 K (hr<SUP>-1</SUP>)는 KOH의 경우 랜더링 부산물 무게 대비 25% 〉 30% 〉 20% 〉 15% 〉 10%순으로 25%를 넣어줬을 때 가장 빨리 분해가 되었다. H₂SO₄의 경우 랜더링 부산물 무게 대비 30% 〉 25% 〉 20% 〉 15% 〉 10%순으로 넣었을 때 빨리 분해되었으며, NaOH도 이와 비슷한 경향이었다. 분해제별 랜더링 부산물의 분해율은 HNO₃의 경우에는 순도가 약 61% 정도로 다른 분해제들 보다 낮아 분해율이 현저히 떨어졌으며, KOH, NaOH 및 H₂SO₄의 경우에는 랜더링 부산물을 25%와 30%를 넣었을 때 큰 차이가 없어 경제성 및 효율성을 고려하였을 때 분해제를 랜더링 부산물의 무게 대비 25%를 넣었을 경우가 가장 적합하다고 판단된다.
In order to develop liquid fertilizer using rendering by-product, rates and velocities of degradation from rendering by-product using pig cadaver investigated under different amount of injection and time with degradation agents (KOH, NaOH, HNO₃ and H₂SO₄). The amount of residue by degradation agent of HNO₃ treatment method was higher than that in KOH, NaOH and H₂SO₄ treatment methods. The degradation velocities (K; hr<SUP>-1</SUP>) of rendering by-product in KOH treatment method were higher in the order of 25% (0.0309 hr<SUP>-1</SUP>) 〉 30% (0.0268 hr<SUP>-1</SUP>) 〉 20% (0.0142 hr<SUP>-1</SUP>) 〉 15% (0.0111 hr<SUP>-1</SUP>) 〉 10% (0.0102 hr<SUP>-1</SUP>) of weight of rendering by-product. In all conditions, the degradation velocity of rendering by-product using H₂SO₄ 30% of weight of rendering by-product was rapid than that for KOH, NaOH and HNO₃ treatment methods. Degradation rates of rendering by-product using NaOH were similar to that of KOH and H₂SO₄ except for HNO₃ under injecting 25% and 30% of rendering by-product weight.