지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2012.11
- 수록면
- 2,136 - 2,142 (7page)
이용수
초록· 키워드
오류제보하기
Worldwide, the lightweight car parts for environment-friendly and fuel economy improvement for product development is accelerating. Existing polymers in this study by the addition of Glass Fiber stiffness secure, but in the lighter parts of steering system, replacing it by the addition of carbon composite material Carbon fiber was also investigated. PA66 Carbon Fiber material and applied in thermoplastic injection, Carbon Fiber Reinforced Plastic (CFRP) materials developed by the thermosetting compression to the existing metal steering system parts replaced were applied.
Optimize the design of the components and material evaluation, progress and interpreted in accordance with the lightweight, basic physical properties were obtained. Ass"y for the final assembled so developed parts were evaluated for performance and durability. Evaluation results of existing Steel compared to the 70% level, and by 30 to 50 percent lighter effect parts, and achieve the level of physical properties, components and Ass"y strength, performance, and room temperature for the duration of the goals were satisfied. Endurance limit in the future, and to propel the vehicle test plans to conduct additional verification.
Optimize the design of the components and material evaluation, progress and interpreted in accordance with the lightweight, basic physical properties were obtained. Ass"y for the final assembled so developed parts were evaluated for performance and durability. Evaluation results of existing Steel compared to the 70% level, and by 30 to 50 percent lighter effect parts, and achieve the level of physical properties, components and Ass"y strength, performance, and room temperature for the duration of the goals were satisfied. Endurance limit in the future, and to propel the vehicle test plans to conduct additional verification.
목차
Abstract
1. 서론
2. 2장 소재 및 부품제조
3. 3장 평가 및 고찰
4. 결론
References
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
[특집3] 고분자 기반의 소재 적용을 통한 자동차 경량화 기술 동향
정선경
,
이평찬
오토저널
2014
.03
탄소섬유복합재료의 시트크로스 부품에서 진공수지주입성형에 의한 성형성 평가
김근영
,
곽성훈
,
한규동
외 4명
한국기계가공학회지
2017
.06
탄소섬유강화 폴리카보네이트의 탄소섬유 함유량에 따른 파괴인성에 관한 연구
김진호
,
오이슬
,
김상범
외 2명
대한기계학회 춘추학술대회
2012
.11
자동차용 고분자소재 경량화 기술개발 동향
임창국
한국자동차공학회 Workshop
2012
.09
배기가스 규제대응 및 연비향상을 위한 자동차 경량화
황태원
한국고분자학회 학술대회 연구논문 초록집
2002
.04
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-556-000411283