지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2011.5
- 수록면
- 331 - 335 (5page)
이용수
초록· 키워드
오류제보하기
Steel tube has been used widely in many fields, such as in the power, transportation and chemical industries and so on. Therefore, most of the time, their mechanical properties are strictly required in detail. In order to enable those parts to work within the safety limits a large variety of heat treatments are conducted in precedent studies. Especially, to produce bended pipe, many process and simulation technique has been developed. Bending applying local induction heating is an efficient way to produce bended pipes of various radius with lower cost and to provide better quality product, since it was invented by Dai-ichi High Frequency Co.(DHF) of Japan in 1961. And it is very important to simulate bending process with transient and residual stresses in surface hardening by high frequency induction heating, to predict the process result. In this paper, to verify confidence of bended pipe, FEM simulation was conducted and compared with the residual stress using hole-drilling gage method.
목차
Abstract
1. 서론
2. 고주파유도가열을 이용한 소반경 곡관
3. 굽힘파이프의 공정해석
4. 실험결과 및 고찰
5. 결론
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-551-000204309