메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
구민예 (전북대학교) 김정현 (전북대학교) 김쾌만 (코스텍) 이성기 (코스텍) 강희용 (전북대학교) 이교우 (전북대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2012년도 추계학술대회 논문집
발행연도
2012.11
수록면
2,709 - 2,714 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this numerical study, we investigated the performance of heat sink used in the inverter of industrial generator. The heat release performance was evaluated with heat input from the heat source, air flowrate of the fan, and ambient air temperature. We set the standard condition on the basis of regular power consumption of chips in the inverter as a 100% heat input, an actual operating flowrate of the fans, ambient air temperature of 298K, and 6 ㎜ spacing between fins. Heat inputs to the heat sink were varied from 100 to 50 % of standard condition. But the portion of heat release thru the heat sink, 89.8%, remains almost the same for the three cases, 100, 75, 50% heat inputs. The other 10.2% of heat was release to ambient thru the natural convection and radiation transfer. While, we changed the air flowrate to the heat sink as 75, 100, and 125%, and the portions of heat release thru the heat sink were 87.7, 89.8, and 91.2%, respectively. Also, the temperature of air flow into the heat sink was varied. In case of 293K, the heat release portion was almost same as that of the standard case, 298K. But the case of 303K, 5K higher than the standard condition, the portion of heat release thru the heat sink was 4% lower than that of standard condition.

목차

Abstract
1. 서론
2. 수치 해석 방법
3. 해석 결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-000184298