지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
Abstract
Introduction
Experimental
Results and discussion
Conclusion
Acknowledgements
References
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
Microstructure and Damping capacity of Semi-Solid AM50 Alloy
기타자료
2006 .09
Principles of Microstructural Formation in Semi-Solid Metal Processing
기타자료
2006 .09
Experimental Determination of the Parameters for Modelling Semi-Solid Processing
기타자료
2006 .09
Semi-Solid 다이캐스팅 공정의 Solid Modeling
한국소성가공학회 학술대회 논문집
2002 .10
Effect of Solid Fraction on Microstructure and Casting Faults of AZ91D in New Type Semi-solid Injection Process
기타자료
2006 .09
Influence of Experimental Parameters on Properties and Microstructure of the Steel X210CrW12 in the Semi-solid State
기타자료
2006 .09
Development and Application of Semi-Solid Processing of Magnesium Alloys
고액공존성형 심포지엄
2003 .12
Microstructure evolution during Semi-solid processing of SCN-Water and Sn-Pb alloys
기타자료
2006 .09
The Effect of Electromagnetic Stirring on the Semi-Solid Microstructure of High-Melting Alloys
기타자료
2006 .09
Optimal Reheating Condition of Semi-solid Material in Semi¬solid Forging by Neural Network
International Journal of Precision Engineering and Manufacturing
2003 .03
Fluidity and Microstructures Characteristics of AZ 91D by using New Type Semi-solid Injection Process
기타자료
2006 .09
Effect of Disturbing Conditions in Semi-solid State on Microstructure Evolution of Magnesium Alloy
기타자료
2006 .09
Microstructure and Mechanical Properties of Cast and Semi-Solid Formed Mg-Al-Zn Alloys
기타자료
2006 .09
Semi-Solid 알루미늄 합금의 부품 성형기술
고액공존성형 심포지엄
1996 .11
Control of Semi-Solid Microstructure of AZ91D Mg alloys by the Electromagnetic Stirring
기타자료
2006 .09
Investigation of Flow Behaviour and Microstructure on X210CrW12 Steel in Semi-Solid State
기타자료
2006 .09
Computer Simulation에 의한 Semi-Solid 단조금형의 설계 및 실험적 검정
한국소성가공학회 학술대회 논문집
2000 .10
고상입자의 분리현상을 고려한 Semi-Solid 알루미늄재료의 변형해석
한국소성가공학회 학술대회 논문집
1997 .05
A Novel Technique to Produce Metal Slurries for Semi-Solid Metal Processing
기타자료
2006 .09
응고현상을 고려한 Semi-Solid 재료의 압축공정에 관한 유한요소해석 ( Finite Element Analysis for the Compression Process of Semi-Solid Material Considering Solidification Phenomenon )
대한기계학회 춘추학술대회
1996 .01
0