지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
2006
Abstract
Introduction
Experimental Procedures
Results and Discussion
Summary
References
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
In-Ladle DTC Rheocasting
고액공존성형 심포지엄
2005 .12
In-Ladle DTC Rheocasting of A206 AI Alloy
고액공존성형 심포지엄
2005 .12
Development of In-Ladle(DTC) Rheocasting Process
고액공존성형 심포지엄
2004 .11
경량합금을 위한 In-Ladle DTC Rheocasting 개발
한국주조공학회지 (주조)
2007 .01
Development of In-Ladle Direct Thermal Control (DTC) Rheocasting Process
기타자료
2006 .09
A356 Al 합금의 In-Ladle Direct Thermal Control Rheocasting
한국주조공학회지 (주조)
2005 .01
Mechanical and microstructural properties investigation on rheocast automotive parts using A356 alloy
기타자료
2006 .09
Potential of the rheocasting process, demonstrated on different aluminum based alloy systems
기타자료
2006 .09
전자교반에 의한 Rheocasting 기술 개발
한국주조공학회지 (주조)
2005 .01
Development of an Advanced Rheocasting Process and its Applications
기타자료
2006 .09
100톤 open ladle 수명 평가 ( Life assessment of 100ton open ladle )
대한용접학회 특별강연 및 학술발표대회 개요집
1999 .01
Research on the Composite Slurry Preparation and Rheocasting of Aluminum Alloy
기타자료
2006 .09
Corrosion Behavior of Rheocast AZ91D Magnesium Alloy
고액공존성형 심포지엄
2002 .11
DTC Technology
대한조선학회지
2012 .12
전자장에 의한 Rheocasting 기술개발
고액공존성형 심포지엄
2004 .11
Hot compressive deformation of rheocast AZ31 magnesium alloy
기타자료
2006 .09
Al-6.2wt.%Si 합금의 등온교반시간에 따른 미세조직변화
한국주조공학회지 (주조)
1995 .01
Optimization of Heat Treatment Cycles for Automotive Parts Produced by Rheocasting Process
기타자료
2006 .09
알루미늄 용탕 운반용 고보온성 Ladle 설계 및 평가
한국주조공학회지 (주조)
2010 .01
Novel Switching Table for Direct Torque Controlled Permanent Magnet Synchronous Motors to Reduce Torque Ripple
JOURNAL OF POWER ELECTRONICS
2013 .11
0