지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
1. Introduction
2. Mean coefficient of separation
3. Experiment
4. Discussion
5. Conclusion
Reference
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
Measurement of the Fiber Orientation for Injection Molding of Long-Fiber Reinforced Polymeric Composites Using Image Processing
플라스틱가공 심포지엄(한일 공동 세미나)
1997 .08
장섬유강화 고분자 복합재료에서 인장강도에 미치는 섬유배향의 영향
대한기계학회 춘추학술대회
2003 .04
섬유강화 고분자 복합재료의 압축성형에 있어서 분리ㆍ배향에 미치는 금형온도의 영향
한국해양공학회지
1995 .12
섬유강화 복합재료 사출성형품의 섬유배향상태
한국생산제조학회 학술발표대회 논문집
2004 .04
단섬유강화 고분자 복합재료의 압축성형에 있어서 섬유배향에 관한 연구
한국해양공학회지
1996 .08
섬유강화 고분자 복합재료 사출성형품의 섬유배향상태
한국생산제조학회지
2005 .02
장섬유강화 플라스틱 복합판의 압축성형에 관한 연구 ( 제11보 , 분리·배향의 상관관계에 미치는 섬유길이의 영향 ) ( A Study on Compression Molding of Long Fiber-Reinforced Polymeric Composites ( Part 11 , The Effect of Fiber Length on Correlation between Separation and Orientation ) )
대한기계학회 춘추학술대회
1992 .01
Analysis of the Compression Molding of Carbon Fiber - Epoxy Composites
한국고분자학회 학술대회 연구논문 초록집
1983 .10
Fiber orientation in the processing of polymer composites
Korea-Australia rheology journal
2002 .01
Effect of the Orientation of Reinforced Fiber on Physical Properties of Composites
한국고분자학회 학술대회 연구논문 초록집
1993 .04
장섬유강화 플라스틱 복합판의 압축성형에 관한 연구 ( 제12보 , 분리 배향에 미치는 금형온도의 영향 ) ( A Study on Compression Molding of Long Fiber-Reinforced Polymeric Composites ( Part 12 , The Effect of Mold Temperature on the Separation and the Orientation ) )
대한기계학회 춘추학술대회
1993 .01
FRP의 사출성형에 있어서 섬유배향상태와 섬유함유율분포에 관한 연구
한국생산제조학회 학술발표대회 논문집
2005 .05
FRP의 사출성형에 있어서 섬유배향상태와 섬유함유율분포에 관한 연구
한국생산제조학회지
2006 .08
Numerical Simulation of Fiber Orientation and Mechanical Properties in Injection Molding of Short-Fiber Reinforced Thermoplastics
플라스틱가공 심포지엄(한일 공동 세미나)
1997 .08
섬유강화 플라스틱 복합재의 압축성형에 있어서 3차원 유동해석 ( Three-Dimensional Flow Analysis for Compression Molding of Fiber Reinforced Polymeric Composites )
대한기계학회 춘추학술대회
1997 .01
Study on Fracture Behavior of Fiber Reinforced Composite Using Optical Fiber sensor
한국고분자학회 학술대회 연구논문 초록집
1993 .10
FRP의 압축성형에 있어서 금형면의 미끄럼 지배상수에 미치는 섬유함유율의 영향 ( The Effects of Fiber Content on Hydrodynamic Coefficient for Compression Molding of Fiber-Reinforced Polymeric Composites )
대한기계학회 춘추학술대회
1996 .01
A Review on Natural Fiber Reinforced Composites
대한기계학회 춘추학술대회
2009 .05
Study on Curing Behavior of Fiber Reinforced Composite Using Optical Fiber Sensor
한국고분자학회 학술대회 연구논문 초록집
1993 .04
Mechanical Properties of Carbon Nanofiber Reinforced Composites and Fiber Orientation Behavior in Thin-wall Injection Molding
플라스틱가공 심포지엄(한일 공동 세미나)
2006 .09
0