메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
윤나래 (국민대학교) 김종철 (국민대학교) 김용석 (국민대학교)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2010년도 한국소성가공학회 춘계학술대회 논문집
발행연도
2010.5
수록면
325 - 328 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Dry sliding wear behavior of AISI 52 100 steel was characterized to explore the effect of microstructure on the wear of the steel. Isothermal heat treatment of the bearing steel was carried out to obtain full pearlitic and bainitic microstructures. Pin-on-disk wear tests of the steel were performed at a fixed load of 100 N in the air. Sliding speed and wear distance were 0.1 m/sec and 300 m, respectively. The alumina ball was utilized as a counterpart. Worn surfaces, wear debris and cross-sections of the worn surfaces were examined with SEM to investigate the wear mechanism of the steel. Tensile properties and hardness of the steel were also evaluated. Wear rate of the steel was correlated with the measured mechanical properties and effect of the microstructure was explored. It was found that neither the hardness nor the strength solely does characterize the wear of the steel. The microstructure strongly influenced the wear rate, and the specimen with the pearlitic microstructure showed higher wear resistance than the bainitic microstructure.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-002335653